Essential details
Shipping:Ocean freight
Product Introduction
Model :YC1093
The furniture surface resistance tester is suitable for curing the surface of all painted furniture, regardless of the material. Not applicable to leather coating and coating of finished fabrics.
This test can be performed on finished furniture, but is usually performed on a test template. The size of the template should be sufficient to meet the test requirements, and the same materials and finishing methods as those used for coating furniture.
The furniture surface resistance tester is suitable for curing the surface of all painted furniture, regardless of the material. Not applicable to leather coating and coating of finished fabrics.
This test can be performed on finished furniture, but is usually performed on a test template. The size of the template should be sufficient to meet the test requirements, and the same materials and finishing methods as those used for coating furniture.
1.1 Usage
This section applies to cured surfaces of all painted furniture, regardless of material. Not applicable to leather coating and coating of finished fabrics.
This test can be performed on finished furniture, but is usually performed on a test template. The size of the template should be sufficient to meet the test requirements and adopt
Same materials and finishing methods as furniture.
1.2 Principles
A standard aluminum alloy block heated to the specified test temperature is placed on a wet cloth on the test template. After reaching the specified test time, remove the wet
Cloth and aluminum alloy block and wipe the test area dry. Let the test template sit for at least 16h. Then, under the specified light conditions, the sample is checked for damage marks (change
Color, swelling, bubbling or other defects), according to the grading scale described in Table 1 to assess the degree of damage.
1.3 Standards Based
GB 4893.2-2005
This section applies to cured surfaces of all painted furniture, regardless of material. Not applicable to leather coating and coating of finished fabrics.
This test can be performed on finished furniture, but is usually performed on a test template. The size of the template should be sufficient to meet the test requirements and adopt
Same materials and finishing methods as furniture.
1.2 Principles
A standard aluminum alloy block heated to the specified test temperature is placed on a wet cloth on the test template. After reaching the specified test time, remove the wet
Cloth and aluminum alloy block and wipe the test area dry. Let the test template sit for at least 16h. Then, under the specified light conditions, the sample is checked for damage marks (change
Color, swelling, bubbling or other defects), according to the grading scale described in Table 1 to assess the degree of damage.
1.3 Standards Based
GB 4893.2-2005
2.1 Description of instrument accessories
1, thermometer 2, aluminum alloy block 3, oven
4, clamp 5, soft wet cloth 6, 2L beaker
7, heat insulation mat 8, polyamide fiber cloth 9, observation box
Thermometer accuracy ±1℃1, thermometer 2, aluminum alloy block 3, oven
4, clamp 5, soft wet cloth 6, 2L beaker
7, heat insulation mat 8, polyamide fiber cloth 9, observation box
Aluminum alloy block (heat source) alloy 6060 manufacturing
The maximum temperature of the oven is greater than 110℃
White polyamide fiber cloth plain woven, gram weight 50g/㎡, knitting number 40 pieces /cm
Heat insulation mat inorganic material, 150x150x25mm
Observation box 60w frosted bulb